EATS modelling towards zero emissions
The environmental and health problems associated with local emissions from vehicle transportation is becoming more evident and thus more urgent to resolve than ever.
The system design of the Exhaust Aftertreatment System (EATS) is a result of many conflicting objectives and the geometry poses many challenges for modelling. This project aims at developing generic methods and models that can be used in industry for any specific EATS design.
In this project, a generic EATS, simplified, but capturing all relevant features of a production EATS will be manufactured. Detailed measurements in combination with 3D-simulations will characterize different transient phenomena. This will enable an engineering model (sets of 1D-models) of the simplified EATS.
1 To experimentally verify “difficult” conditions for high performance during cold-start and other transients. To characterize these conditions in terms of spatially resolved temperatures, residence times and concentrations.
2 To develop an engineering model that can couple spatial resolution (“simplified CFD”) with standard 1D-catalytic models.
- Combustion Engine Researc Centre (CERC) (Academic, Sweden)
This page is only available in english
- Combustion Engine Research Center (Centre, Sweden)