Wärmefjord, Kristina; Söderberg, Rikard; Ottosson, Peter; Werke, Mats; Lorin, Samuel; Lindkvist, Lars; Wandebäck, Fredrik: Prediction of geometrical variation of forged and stamped parts for assembly variation simulation. Proceedings of International Deep Drawing Research Group Conference 2013, IDDRG2013,

Wärmefjord, Kristina; Söderberg, Rikard; Lindkvist, Lars: Simulation of Variation in Assembly Forces Due to Variation in Spot Weld Position. Smart Product Engineering, Proceedings of the 23rd CIRP Design Conference,

Wärmefjord, Kristina; Söderberg, Rikard; Lindkvist, Lars: Simulation of the effect of geometrical variation on assembly and holding forces. International Journal of Product Development, 18 (1) pp. 88-108.

Edholm, Peter; Lindkvist, Lars; Söderberg, Rikard: GEOMETRICAL COUPLING ANALYSIS TO REDUCE COMPLETE ASSEMBLY LINE COMPLEXITY. Proceedings of the ASME 2012 International Mechanical Engineering Congress & Exposition, IMECE2012, November 9-15, 2012, Houston, Texas, USA,

Lindau, Björn; Andersson, Alf; Lindkvist, Lars; Söderberg, Rikard: Body in White Geometry Measurements of Non-Rigid Components: a Virtual Perspective. Proceedings of the ASME 2012 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, IDETC/CIE 2012,

Lindau, Björn; Andersson, Alf; Lindkvist, Lars; Söderberg, Rikard: Statistical shape modeling in virtual assembly using PCA-technique. Technologies and Systems for Assembly Quality, Productive and Customization, Proceedings of the 4th CIRP Conference on Assembly Technologies and Systems, pp. 119 - 124. ISBN/ISSN: 978-0-615-64022-8

Lindau, Björn; Andersson, Alf; Lindkvist, Lars; Söderberg, Rikard: Using Forming Simulation Results In Virtual Assembly Analysis. Proceedings of the ASME 2012 International Mechanical Engineering Congress & Exposition, IMECE2012,

Lorin, Samuel; Söderberg, Rikard; Lindkvist, Lars; Sandboge, Robert: COMBINING VARIATION SIMULATION WITH THERMAL EXPANSION FOR GEOMETRY ASSURANCE. Proceedings of the ASME 2012 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference IDETC/CIE 2012 ,

Lorin, Samuel; Lindkvist, Lars; Söderberg, Rikard: SIMULATING PART AND ASSEMBLY VARIATION FOR INJECTION MOLDED PARTS. Proceedings of the ASME 2012 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference IDETC/CIE 2012 ,

Spensieri, Domenico; Carlson, Johan S; Bohlin, Robert; Lindkvist, Lars; Söderberg, Rikard: Non-nominal path planning for increased robustness of robotized assembling processes. 4th CIRP Conference on Assembly Technology and Systems - CATS 2012, University of Michigan, Ann Arbor, USA on May 21-23, 2012,

Söderberg, Rikard; Wärmefjord, Kristina; Lindkvist, Lars; Berlin, Rolf: The influence of spot weld position variation on geometrical quality. CIRP Annals - Manufacturing Technology, 61 (1) pp. 13-16.

Edholm, Peter; Lindkvist, Lars; Söderberg, Rikard: Geometry robustness evaluation for common parts in platform architecture. International journal of shape modeling, 16 (1&2) pp. 129-150.

Edholm, Peter; Lindkvist, Lars; Söderberg, Rikard: MINIMIZING GEOMETRIC VARIATION IN MULTISTAGE ASSEMBLY LINE BY GEOMETRICAL DECOUPLING. ASME 2011 International Mechanical Engineering Congress & Exposition, IMECE2011, November 11-17, 2011, Denver, Colorado, USA,

Forslund, Karin; Wagersten, Ola; Tafuri, Sebastian; Segerdahl, Daniel; Carlson, Johan S; Lindkvist, Lars; Söderberg, Rikard: Parameters Influencing the Perception of Geometrical Deviations in a Virtual Environment. Proceedings of the ASME 2011 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, August 28-31, Washington, DC, 9 pp. 1105-1114. ISBN/ISSN: 978-079185486-0

Edholm, Peter; Lindkvist, Lars; Söderberg, Rikard: Geometry robustness evaluation for common parts in platform architecture. Proceedings of the 8th International Symposium on Tools and Methods of Competitive Engineering, TMCE 2010. April 12–16, 2010, Ancona, Italy, 2 pp. 1003-1012 . ISBN/ISSN: 978-905155060-3

Kero, Timo; Söderberg, Rikard; Andersson, Matts; Lindkvist, Lars: A Method for Improving Dental Crown Fit-Increasing the Robustness. International Journal of Medicine and Medical Sciences, 1 (3) pp. 185-192.

Lööf, Johan; Lindkvist, Lars; Söderberg, Rikard: Optimizing Locator Position to Maximize Robustness in Critical Product Dimensions. Proceedings of the ASME 2009 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, IDETC/CIE 2009, August 30 - September 2, 2009, San Diego, California, USA, pp. 515-522 . ISBN/ISSN: 978-0-7918-4899-9

Wandebäck, Fredrik; Söderberg, Rikard; Carlson, Johan S; Wahlborg, Per-Johan; Lindkvist, Lars; Ekstedt, Fredrik: Variation Feedback and 3D Visualization of Geometrical Inspection Data. Proceedings of the ASME 2009 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference IDETC/CIE, August 30 - September 2, 2009, San Diego, California, USA, 8 pp. 197-208. ISBN/ISSN: 978-079184905-7

Wärmefjord, Kristina; Söderberg, Rikard; Lindkvist, Lars: Strategies for Optimization of Spot Welding Sequence with Respect to Geometrical Variation in Sheet Metal Assemblies. Proceedings of the ASME 2010 International Mechanical Engineering Congress & Exposition, Vancouver, British Columbia, Canada, November 12-18, 2010.,

Wärmefjord, Kristina; Söderberg, Rikard; Lindkvist, Lars: Variation Simulation of Spot Welding Sequence for Sheet Metal Assemblies. Proceedings of NordDesign2010 International Conference on Methods and Tools for Product and Production Development, August 25-27, Gothenburg, Sweden, ISBN/ISSN: 978-91-633-7064-9

Spensieri, Domenico; Carlson, Johan S; Lindkvist, Lars; Bohlin, Robert; Söderberg, Rikard: A method to optimize geometrical quality and motion feasibility of assembly sequences. The 11th CIRP International Conference on Computer Aided Tolerancing, Annecy, France,

Lööf, Johan; Söderberg, Rikard; Lindkvist, Lars: Secure Variation along a Robot Path using Discrete Tolerance Allocation Optimization. Proceedings of the 2nd CIRP Conference on Assembly Technologies and Systems, 21-23 September 2008, Toronto, Ontario, Canada,

Söderberg, Rikard; Wickman, Casper; Lindkvist, Lars: Improving Decision Making by Simulating and Visualizing Geometrical Variation in Non-rigid Assemblies. CIRP Annals-Manufacturing Technology 2008,

Wärmefjord, Kristina; Lindkvist, Lars; Söderberg, Rikard: Tolerance Simulation of Compliant Sheet Metal Assemblies Using Automatic Node-Based Contact Detection. Proceedings of ASME International Mechanical Engineering Congress & Exposition, October 31- November 6, 2008, Boston, USA ,

Dahlström, Stefan; Lindkvist, Lars: Variation simulation of sheet metal assemblies using the method of influence coefficients with contact modeling. Journal of Manufacturing Science and Engineering-Transactions of the Asme, 129 (3) pp. 615-622.

Kero, Timo; Söderberg, Rikard; Andersson, Matts; Lindkvist, Lars: Process Optimization Regarding Geometrical Variation and Sensitivity Involving Dental Drill- and Implant-Guided Surgeries. International Journal of Biomedical Sciences , 2 (4) pp. 237-243.

Kero, Timo; Lindkvist, Lars; Söderberg, Rikard; Andersson, Matts: VARIATION SIMULATION TOOLKIT FOR VIRTUAL VERIFICATION OF DENTAL DRILL-GUIDED SURGERIES. III INTERNATIONAL CONGRESS ON COMPUTATIONAL BIOENGINEERING, pp. 333-338. ISBN/ISSN: 978-980-6939-10-3

Lindkvist, Lars; Söderberg, Rikard; Carlson, Johan S: Variation Analysis Toolbox for Non-Nominal Path Planning for Industrial Robots. ASME IMECE 2007, November 11-15, 2007, Seattle, Washington, USA, (IMECE2007-43376)

Lööf, Johan; Lindkvist, Lars; Söderberg, Rikard: Envelope of Rotating Parts Based on Motion and Variation Simulation Data. 10th CIRP Conference on Computer Aided Tolerancing, Specification and Verification for Assemblies, March 21-23, Erlangen, Germany, 2007,

Dagman, Andreas; Söderberg, Rikard; Lindkvist, Lars: Form division in automobile design - linking design and manufacturability. Design 2006 9th International Design Conference, May 15-18, 2006, Dubrovnik, Croatia, Editor Marjanovic´, D, 1 pp. 495-502. ISBN/ISSN: 953-6313-79-0

Lööf, Johan; Lindkvist, Lars; Söderberg, Rikard: Visualization of Motion Envelope of Parts and Assemblies Based on Simulation or Measurement Data. Proceedings of IMECE2006, 2006 International Mechanical Engineering Congress and Exposition, November 5-10, 2006 Chicago, Illinois, USA,

Lööf, Johan; Söderberg, Rikard; Lindkvist, Lars: Visualization of Variation in Early Design Phases: A Convex Hull Approach. Proceedings of The Design 2006 9th International Design Conference, May 15-18, Dubrovnik, Croatia, 2 pp. 905-912. ISBN/ISSN: 953-6313-80-4

Söderberg, Rikard; Lindkvist, Lars; Dahlström, Stefan: Computer Aided Robustness Analysis for Compliant (non-rigid) Assemblies. Journal of Engieering Design, 17 (2)

Söderberg, Rikard; Lindkvist, Lars; Dahlström, Stefan: Computer-aided robustness analysis for compliant assemblies. Journal of Engineering Design, 17 (5) pp. 411-428.

Söderberg, Rikard; Lindkvist, Lars; Carlson, Johan S: Managing Physical Dependencies through Location System Design. Journal of Engineering Design, 17 (2)

Söderberg, Rikard; Lindkvist, Lars; Carlson, Johan S: Virtual Geometry Assurance For Effective Product Realisation. 1st Nordic Conference on Product Lifecycle Management - NordPLM' 06, Göteborg, January 25-26 2006.,

Carlson, Johan S; Söderberg, Rikard; Bohlin, Robert; Lindkvist, Lars; Hermansson, Tomas: Non-nominal Path Planning of Assembly Processes. 2005 ASME International Mechanical Engineering Congress & Exposition,

Dahlström, Stefan; Lindkvist, Lars; Söderberg, Rikard: Practical Implications in Tolerance Analysis of Sheet Metal Assemblies. 9th CIRP Seminar on Computer-Aided Tolerancing, April 10-12, 2005, Tempe, Arizona,USA,

Lindkvist, Lars; Carlson, Johan S; Söderberg, Rikard: Virtual Locator Trimming in Pre-Production-Rigid and Non-Rigid Analysis. Proceedings of IMECE2005, 2005 ASME International Mechanical Engineering Congress and Exposition, November 5-11, 2005,Orlando, Florida, USA,

Carlson, Johan S; Söderberg, Rikard; Lindkvist, Lars: Geometrical Inspection Point Reduction Based on Combined Cluster and Sensitivity Analysis. ASME International Mechanical Engineering Congress & Exposition,

Lindkvist, Lars; Söderberg, Rikard: Computer Aided Tolerance Chain and Sensitivity Analysis . Journal of Engineering Design, 14 (1) pp. 17-39.

Söderberg, Rikard; Lindkvist, Lars: Geometrical Coupling Analysis in Assembly Design. Second International Conference on Axiomatic Design, MIT, Cambridge, MA, June 9-11, 2002,

Söderberg, Rikard; Lindkvist, Lars: Stability and Seam Variation Analysis for Automobile Body Design. Journal of Engineering Design , 13 (2)

Söderberg, Rikard; Lindkvist, Lars: Automated Seam Variation and Stability Analysis in Automobile Body Design. 7th CIRP Seminar on Computer-Aided Tolerancing, April 24-25, 2001, Cachan, France,

Carlson, Johan S; Lindkvist, Lars; Söderberg, Rikard: Multi-Fixture Assembly System Diagnosis Based on Part and Subassembly Measurement Data. Proceedings of the ASME Design for Manufacture conference, September 10-13, Baltimore, Maryland, USA, DETC2000/DFM-14037,

Lindkvist, Lars; Söderberg, Rikard: Tool for Assembly Locating Scheme Definition. Proceedings of the 26th ASME Design Automation Conference, September 10-13, Baltimore, MAryland, USA, DETC2000/DAC-14498,

Söderberg, Rikard; Lindkvist, Lars: Robust Design and Tolerancing from Concept to Detail Design. Proceedings of the 33rd CIRP International Seminar on Manufacturing Systems, Stockholm, Sweden, 5-7 June, 2000,

Lindkvist, Lars; Söderberg, Rikard: Concurrent Robust Product and Process Design. Proccedings of the ASME Design Automation Conference, September 12-15, Las Vegas, Nevada, USA, DETC99/DAC-8687,

Söderberg, Rikard; Lindkvist, Lars: Computer Aided Assembly Robustness Evaluation. Journal of Engineering Design, 10 (2) pp. 165-181.

Söderberg, Rikard; Lindkvist, Lars: Two-Step Procedure for Robust Design Using CAT Technology. Proceedings of the 6th CIRP International Seminar on Computer Aided Tolerancing, Enschede, the Netherlands, March 22-24. 1999,

Lindkvist, Lars: Three-Dimensional Load-Deformation Relationships of Arbitrarily Loaded Coiled Springs. Göteborg : Chalmers University of Technology. Diss.