Ignell, Sofie; Rigdahl, Mikael: Angle-resolved light scattering from textured injection-molded plastics. Journal of Applied Polymer Science, 124 (2) pp. 1624-1633.

Ignell, Sofie; Porsgaard, P.; Rigdahl, Mikael: Ghost marks - gloss-related defects in injection-molded plastics. Polymer Engineering and Science, 52 (2) pp. 459-466.

Strååt, Martin; Rigdahl, Mikael; Hagström, Bengt: Conducting bicomponent fibers obtained by melt spinning of PA6 and polyolefins containing high amounts of carbonaceous fillers. Journal of Applied Polymer Science, 123 (2) pp. 936-943.

Filli, Kalep; Sjöqvist, Mia; Öhgren, Camilla; Stading, Mats; Rigdahl, Mikael: Development and characterization of extruded biodegradable foams based on zein and pearl millet flour. Annual Transactions the Nordic Rheology Society, 19 pp. 139-145.

Iannuzzi, Giovanna; Nafari, Alexandra; Rigdahl, Mikael: Characteristics of flow marks in injection-moulded surfaces and their ageing behaviour. Proc. Advances in Polymer Science and Technology 2, Linz, Austria, pp. 30.

Iannuzzi, Giovanna; Nafari, Alexandra; Rigdahl, Mikael: Characteristics of flow marks in injection-moulded surfaces and their ageing behaviour. Proc. Nordic Polymer Days 2011, Stockholm, pp. 95.

Persson, Henrik; Rondin, Jerome; Bouquey, Michel; Muller, Rene; Rigdahl, Mikael; Rychwalski, Rodney: Influence of manufacturing on electrical performances of GNP/PS composites. Proc. Nordic Polymer Days 2011, Stockholm, pp. 40.

Persson, Henrik; Rondin, J.; Bouquey, M.; Miller, R.; Rigdahl, Mikael; Rychwalski, Rodney: Influence of manufacturing on electrical performances of graphite nanoplatelet filled polystyrene. NT11 International Conference on Science and Applications of Nanotubes, University of Cambridge, July 11-16, Cambridge (UK), 2011,

Strååt, Martin; Boldizar, Antal; Rigdahl, Mikael; Hagström, Bengt: Improvement of melt spinning properties and conductivity of immiscible polypropylene/polystyrene blends containing carbon black by addition of styrene-ethylene-butene-styrene block copolymer. Polymer engineering and science, 51 (6) pp. 1165-1169.

Strååt, Martin; Toll, Staffan; Boldizar, Antal; Rigdahl, Mikael; Hagström, Bengt: Melt spinning of conducting polymeric composites containing carbonaceous fillers. Journal of Applied Polymer Science, 119 (6) pp. 3264-3272.

Arino, I.; Boldizar, Antal; Ignell, Sofie; Karlsson, Hanna; Kleist, U.; Rebeggiani, Sabina; Rigdahl, Mikael: The Influence of the Measuring/Viewing Angle on the Color of Injection-Molded Plastics. International Journal of Polymeric Materials, 59 (4) pp. 292-306.

Iannuzzi, Giovanna; Rigdahl, Mikael: Generation of flow marks - possible relations to the rheological properties of polypropylene melts. Proc. Annual European Rheology Conference (AERC 2010), pp. 25.

Iannuzzi, Giovanna; Rigdahl, Mikael: Rheological properties of elastomer-modified polypropylene and their influence on the formation of flow marks. Journal of Applied Polymer Science, 118 pp. 604-610.

Ignell, Sofie; Kleist, Ulf; Rigdahl, Mikael: Evaluating contrast gloss of textured polymeric surfaces. Polymer Engineering and Science, 50 (11) pp. 2114-2121.

Ignell, Sofie; Arino, Ruth; Iannuzzi, Giovanna; Kleist, Ulf; Rigdahl, Mikael: Three-dimensional scanning electron microscopy characterization of the topography of textured polymeric surfaces. Polymer Engineering and Science, 50 (8) pp. 1527-1534.

Persson, Henrik; Rychwalski, Rodney; Rigdahl, Mikael; Svanberg, Christer: Melt rheology as a tool to evaluate dispersion of expanded graphite in PS. Proc. Annual European Rheology Conference (AERC 2010), pp. 141.

Sjöqvist, Mia; Boldizar, Antal; Rigdahl, Mikael: Processing and water absorption behavior of foamed potato starch. Journal of Cellular Plastics, 46 (6) pp. 497-517.

Stading, Mats; Rigdahl, Mikael: Book of Abstracts AERC2010. Book of Abstracts Annual European Rheology Conference 2010, pp. 1-303.

Strååt, Martin; Rigdahl, Mikael; Hagström, Bengt: Conducting bicomponent fibres obtained by melt spinning of PA6 and polyolefins containing high amounts of carbonaceous fillers.

Strååt, Martin; Rigdahl, Mikael; Boldizar, Antal; Hagström, Bengt: Improvement of melt spinning properties and conductivity of immiscible PP/PS blends containing carbon black by addition of SEBS.

Iannuzzi, Giovanna; Boldizar, Antal; Rigdahl, Mikael: Characterization of flow-induced surface defects in injection moulded components - Case studies. Annual Transactions The Nordic Rheology Society, 17 pp. 157-165. ISBN/ISSN: 978-952-15-2136-2

Ignell, Sofie; Kleist, Ulf; Rigdahl, Mikael: On the relations between color,gloss, and surface texture in injection-molded plastics. Color research and application, 34 (4) pp. 291-298.

Ignell, Sofie; Kleist, Ulf; Rigdahl, Mikael: Visual perception and measurements of texture and gloss of injection-molded plastics. Polymer Engineering and Science, 49 (2) pp. 344-353.

Knutson Wedel, Maria; Rychwalski, Rodney; Rigdahl, Mikael; Malmqvist, Johan; Persson, Gert; Karlsson, Birger: Experiences of and Improvement of Writing Skills in a Lecture Based Course in Polymeric Materials. Proceedings of the 5th International CDIO Conference, Singapore,

Persson, Henrik; Jenni, Martin; Nyborg, Lars; Rigdahl, Mikael: In situ studies and simulation of mould filling with a model system for PIM. International Polymer Processing, 24 (5) pp. 406-413.

Persson, Henrik; Hausnerova, Berenika; Nyborg, Lars; Rigdahl, Mikael: Rheological and thermal properties of a model system for PIM. International Polymer Processing, 24 (2) pp. 206-212.

Sjöqvist, Mia; Boldizar, Antal; Rigdahl, Mikael: Processing and properties of expanded starch materials. Journal of Cellular Plastics, 45 (1) pp. 51-66.

Altskär, Annika; Andersson, Roger; Boldizar, Antal; Koch, Kristine; Stading, Mats; Rigdahl, Mikael; Thunwall, Mats: Some effects of processing on the molecular structure and morphology of thermoplastic starch. Carbohydrate Polymers, 71 pp. 591-597.

Iannuzzi, Giovanna; Rigdahl, Mikael: Characterisation of tiger stripes on injection-moulded polypropylene components. Proc. Nordiska Polymerdagarna 2008,

Persson, Henrik; Hausnerova, B; Nyborg, Lars; Rigdahl, Mikael: Rheological properties and PVT-behaviour of a model system for PIM. Proc. Polymer Processing Society 2008 (PPS-24), (S11-685)

Sjöqvist, Mia; Boldizar, Antal; Rigdahl, Mikael: Processing and properties of expanded starch materials. Nordiska Polymerdagarna 2008,

Thunwall, Mats; Kuthanova, Vanda; Boldizar, Antal; Rigdahl, Mikael: Film blowing of thermoplastic starch. Carbohydrate Polymers, 71 pp. 583-590.

Thunwall, Mats; Boldizar, Antal; Rigdahl, Mikael; Banke, Karl; Lindström, Tom; Tufvesson, Helena; Högman, Stefan: Processing and properties of mineral-interfaced cellulose fibre composites. Journal of Applied Polymer Science, 107 (2) pp. 918-929.

Valverde-Velasco, Anna; Karlsson, MariAnne; Boldizar, Antal; Westberg, Henrik; Ignell, Sofie; Rigdahl, Mikael: On the relations between the surface topography and tactile perception of injection-moulded textured polymers. Proc. Polymer Processing Society 2008 (PPS-24), (S03-682)

Arino, Ingrid; Johansson, Sofie; Liljenström-Leander, Eleonore; Kleist, Ulf; Rigdahl, Mikael: The effect of texture on the pass/fail colour tolerances of injection-molded plastics. Color Research and Application, 32 (1) pp. 47-54.

Ignell, Sofie; Kleist, Ulf; Rigdahl, Mikael: Relations between colour, gloss and surface texture in injection-moulded plastics. Proc Nordiska Polymerdagarna 2007,

Sjöqvist, Mia; Boldizar, Antal; Rigdahl, Mikael: Processing and properties of expanded starch materials. Proc. Biofoams 2007, Capri, Italy,

Sjöqvist, Mia; Boldizar, Antal; Rigdahl, Mikael: Processing and properties of expanded starch materials. Proc. Polymer Processing Society Europe/Africa Regional Meeting, Göteborg,

Sjöqvist, Mia; Boldizar, Antal; Rigdahl, Mikael: Processing and properties of expanded starch materials. Proc Nordiska Polymerdagarna 2007,

Boldizar, Antal; Pisciotti, Francesco; Arino, Ingrid; Rigdahl, Mikael: The influence of the processing parameters on the gloss and colour of an injection-moulded pigmented polypropylene. Proc. Nordic Polymer Days, Copenhagen, pp. Section 2.15.

Putkisto, Kaisa; Maijala, Juha; Grön, Johan; Rigdahl, Mikael: Challenges set for coating powders applied to dry surface treatment of paper. Proc. TAPPI Advanced Coating Fundamental Symposium, pp. 19-27.

Steffner, Olof; Klemets, Harald; Rigdahl, Mikael: The influence of wet pressing and precalendering on the structure and properties of double-coated board. Paperi ja Puu, 88 (4) pp. 234-238.

Strååt, Martin; Boldizar, Antal; Rigdahl, Mikael; Linder, Åsa; Eklind, Hans: Changes in dielectric properties for polyethylene at high frequencies. Proc. Nordic Polymer Days, Copenhagen, pp. Section 2.18.

Thunwall, Mats; Boldizar, Antal; Rigdahl, Mikael: Compression molding and tensile properties of thermoplastic potato starch materials. Biomacromolecules, 7 pp. 981-986.

Thunwall, Mats; Boldizar, Antal; Rigdahl, Mikael: Extrusion processing of high amylose potato starch materials. Carbohydrate Polymers, 65 pp. 441-446.

Thunwall, Mats; Boldizar, Antal; Rigdahl, Mikael; Kuthanova, Vanda: On the stress-strain behavior of thermoplastic starch melts. International Journal of Polymer Analysis and Characterization, 11 (6) pp. 419-428.

Thunwall, Mats; Khutanova, Vanda; Boldizar, Antal; Rigdahl, Mikael: The effect of some plasticizers on the viscosity and stress-strain behaviour of thermoplastic starch melts. Proc. Nordic Polymer Days, Copenhagen, pp. Section 3.4.

Arino, Ingrid; Kleist, Ulf; Rigdahl, Mikael: Effect of gloss and texture on the color of injection-molded pigmented plastics. Polymer Engineering and Science, 45 (5) pp. 733-744.

Arino, Ingrid; Kleist, Ulf; Mattsson, Lars; Rigdahl, Mikael: On the relation between surface texture and gloss of injection-molded pigmented plastics. Polymer Engineering and Science, 45 (10) pp. 1343-1356.

Arino, Ingrid; Kleist, Ulf; Rigdahl, Mikael: Relationships between gloss, surface texture and colour of injection moulded pigmented plastics. Nordic Polymer Days 2005, pp. 33. Göteborg :

Pisciotti, Francesco; Boldizar, Antal; Rigdahl, Mikael; Arino, Ingrid: Effects of injection-molding conditions on the gloss and color of pigmented polypropylene. Polymer Engineering and Science, 45 (12) pp. 1557-1567.

Pisciotti, Francesco; Boldizar, Antal; Rigdahl, Mikael: Injection Moulding and Mechanical properties of Recovered Polypropylene. International Polymer Processing, 20 (3) pp. 257-264.

Pisciotti, Francesco; Boldizar, Antal; Rigdahl, Mikael: The Gloss of Injection-Moulded Recovered Polypropylene. International Polymer Processing, 20 (3) pp. 250-256.

Schuman, Thomas; Karlsson, Anders; Larsson, Johan; Wikström, Magnus; Rigdahl, Mikael: Characteristics of pigment-filled polymer coatings on paperboard. Progress in Organic Coatings, 54 pp. 360-371.

Schuman, Thomas; Karlsson, Anders; Larsson, Johan; Wikström, Magnus; Rigdahl, Mikael: Pigment-filled polymer coatings on paperboard. Nordic Polymer Days 2005, pp. 46.

Schuman, Thomas; Adolfsson, Britt; Wikström, Magnus; Rigdahl, Mikael: Surface treatment and printing properties of dispersion-coated paperboard. Progress in Organic Coatings, 54 pp. 188-197.

Thunwall, Mats; Kuthanova, Vanda; Boldizar, Antal; Rigdahl, Mikael: Thermoplastic properties of oxidised starch. Nordic Polymer Days 2005, pp. 65-66.

Arino, Ingrid; Kleist, Ulf; Rigdahl, Mikael: Color of pigmented plastics - Meaurements and predictions. Polymer Engineering and Science, 44 (1) pp. 141-152.

Arino, Ingrid; Kleist, Ulf; Rigdahl, Mikael: On the relation between surface texture and gloss of injection-moulded pigmented plastics. Nordic Polymer Days 2004, pp. 4.1.

Arino, Ingrid; Kleist, Ulf; Gil Barros, Gustavo; Johansson, Per-Åke; Rigdahl, Mikael: Surface texture characterization of injection-molded pigmented plastics. Polymer Science and Engineering, 44 (9) pp. 1615-1626.

Putkisto, Kaisa; Maijala, Juha; Grön, Johan; Rigdahl, Mikael: An approach to the dry-state preparation of coating particles for use in dry surface treatment of paper. Progress in Organic Coatings, 51 pp. 257-266.

Putkisto, Kaisa; Maijala, Juha; Grön, Johan; Rigdahl, Mikael: Dry-state preparation of coating particles to eliminate water usage prior to dry surface treatment of paper. Professional Papermaking by Wochenblatt fur Papierfabrikation, 1 pp. 95-102.

Putkisto, Kaisa; Maijala, Juha; Grön, Johan; Rigdahl, Mikael: Influence of binder thermomechanical properties on the fixing process and structure of dry surface treated papers. Journal of Pulp and Paper Science, 30 (6) pp. 145-152.

Putkisto, Kaisa; Maijala, Juha; Grön, Johan; Rigdahl, Mikael: Viscoelastic structure properties of the polymer binder affecting the processability, structure and properties of dry surface treated papers. Solutions and Tappi Journal, 3 (6) pp. 19-25.

Rigdahl, Mikael; Riha, Pavel; Rychwalski, Rodney; Kubat, Michael; Kubát, Josef: The clustering mechanism underlying a kinetic model related to Bose-Einstein statistics. Mechanics of Time-Dependent Materials, 8 (2) pp. 95-103.

Schuman, Thomas; Wikström, Magnus; Rigdahl, Mikael: Carboxylated and cross-linked styrene-butadiene latices for dispersion coating. Nordic Polymer Days 2004,

Schuman, Thomas; Wikström, Magnus; Rigdahl, Mikael: Coating of surface-modified papers with poly(vinyl alcohol). Surface and Coatings Technology, 183 pp. 96-105.

Schuman, Thomas; Wikström, Magnus; Rigdahl, Mikael: Dispersion coating with carboxylated and cross-linked styrene-buadiene latices. 1. Effect of some polymer characteristics on film properties. Progress in Organic Coatings, 51 pp. 220-227.

Schuman, Thomas; Wikström, Magnus; Rigdahl, Mikael: Dispersion coating with carboxylated and cross-linked styrene-butadiene latices. Proc. 12th Internationa Coating Science and Technology Symposium, pp. 195.

Schuman, Thomas; Wikström, Magnus; Rigdahl, Mikael: Dispersion coating with carboxylated and cross-linked styrene-butadiene latices. 2. Effects of substrate and polymer characteristics on the properties of coated paperboard. Progress in Organic Coatings, 51 pp. 228-237.

Thunwall, Mats; Boldizar, Antal; Rigdahl, Mikael: Extrusion processing of high amylose potato starch materials. Nordic Polymer Days 2004, pp. 2.8.

Toft, Nils; Rigdahl, Mikael: Influence of extrusion coating conditions on structure and tensile properties of polyethylenes. International Journal of Polymeric Materials, 53 (9) pp. 809-828.

Schuman, Thomas; Wikström, Magnus; Rigdahl, Mikael: The effect of hot calendering of the substrate on the barrier properties of pol(vinyl alcohol)-coated papers. Nordic Pulp and Paper Research Journal, 18 (1) pp. 81-89.