Student project presentations

23 May 2012 09:00
Student project presentation
Final seminar for Åsa Isacson: Nightmares and Dreams - Imagining the worst, planning for the best - Kungsportsavenyn Final seminar for Master's Thesis, Chalmers Architecture, 23 May 2012, kl. 9-11 in room 2271.
23 May 2012 10:00
Student project presentation
Produktutveckling av rostfri brandpost för ökad lönsamhet och driftsäkerhet (Product development of stainless steel fire hydrant for greater efficiency and reliability), Master thesis presentation
23 May 2012 10:00
Student project presentation
Back Protection Concept Design Research - Design a back protection concept for skiing and cycling users
23 May 2012 13:00
Student project presentation
M.Sc. thesis: Development of small scale hybrid wheel loader test platform Master thesis presentation by Per Björe Dahl and Rickard Nilsson
24 May 2012 09:00
Student project presentation
Nicklas Landén and Jacob Lilljegren: Three-dimensional strut-and-tie modelling of wind power plant foundations Nicklas Landén and Jacob Lilljegren present their Masters Thesis in the Master Programme Structural Engineering and Building Performance Design
24 May 2012 13:15
Student project presentation
M.Sc. thesis: Calibration of a SONAR array Master thesis presentation by Lin Wei
24 May 2012 15:00
Student project presentation
Sara Johansson and Tove Vestlund: Parameters affecting the occurrence of bicycle accidents - A study of causes for bicycle accidents in Gothenburg, with focus on the road design Sara Johansson and Tove Vestlund present their Masters Thesis in the Master Programme Geo and Water Engineering
25 May 2012 09:00
Student project presentation
Fostering Efficient Knowledge Transfer in Cross-Cultural Organizations Master's Thesis presentation in the QOM programme by Lennart Tibblin
25 May 2012 10:00
Student project presentation
Supplier Performance Dashboard at VLC Master's thesis presentation by Jeanette Gustafsson and Erika Karlsson in the SCM Programme
25 May 2012 10:00
Student project presentation
Implementation of a new catalyst in the catalytic polymerisation unit at Preem refinery in Lysekil: Simulation and re-design of an existing C3/C4 splitter Marcus Holmberg, Chemical and Biological Engineering
25 May 2012 13:15
Student project presentation
Selective catalytic reduction of NOx with NH3. The effect of Cu-loading on different reaction steps over Cu-BEA catalysts Catur Rini Widyastuti, Chemical and Biological Engineering
25 May 2012 13:15
Student project presentation
Master Thesis presentation: Yan Dong ARMA and GARCH-type Modeling (of) Electricity Prices
25 May 2012 13:30
Student project presentation
Soap level monitoring system
25 May 2012 15:15
Student project presentation
M.Sc. thesis: Reconfigurable bioimpedance spectrometer for the evaluation of impedance estimation methods suitable for spectroscopy measurements Master thesis presentation by Zelealem Kebkab Kassaye
28 May 2012 08:30
Student project presentation
Design, simulation and evaluation of two different topologies for a 2.4 MW DC-DC fullbridge converter
28 May 2012 09:00
Student project presentation
Feature Development Process harmonization with lean development, Master thesis presentation
28 May 2012 09:30
Student project presentation
Välkommen till 3 redovisningar av 15 ECT-examensarbeten
28 May 2012 10:00
Student project presentation
M.Sc. thesis: Inverse Gaussian Distribution: A new shadowing model and its application to communication systems Master thesis presentation by Vetriselvam Gopal
28 May 2012 12:00
Student project presentation
SLUTGENOMGÅNG I REALITY STUDIO 2012 Måndagen den 28 maj, Ateljén, A-huset, Chalmers.
28 May 2012 13:00
Student project presentation
How to find and transfer established business opportunities to new markets Master's Thesis presentation in the MEI programme by Ola Hofgren
28 May 2012 14:00
Student project presentation
Energy savings of tissue machines - Flexible application of technologies in different locations
28 May 2012 14:00
Student project presentation
Energy savings of tissue machines - Flexible application of technologies in different locations
28 May 2012 15:00
Student project presentation
The value of project managment SaaS Master's Thesis presentation in the MEI programme by Evelina Karlsson
29 May 2012 10:00
Student project presentation
Truck-to-Car Frontal Crash Compatibility- Quantification of the possible crash severity reduction from an additional truck frontal structure Master Thesis Presentation by Bertrand Lefer & Ivan Rebolloso
29 May 2012 10:00
Student project presentation
Diffusion of innovation system elements: A novel method to study technology development and its application to wind power
29 May 2012 14:00
Student project presentation
A progress assessment of the renewable energy target within the EU 20-20-20 targets
30 May 2012 09:00
Student project presentation
Auricle cartilage regeneration: seeding, migration and interaction of human chondrocytes on novel composite scaffolds Manuela Seliger, Chemical and Biological Engineering
30 May 2012 09:00
Student project presentation
Hot-melt extrusion of modified release pellets - Influence of the formulation and extrusion process on extended and enteric release profile Malin Lindén, Chemical and Biological Engineering
30 May 2012 10:00
Student project presentation
Multichanneled bacterial nanocellulose scaffold for generation of an artificial vascular system Sanna Sämfors, Chemical and Biological Engineering
30 May 2012 10:00
Student project presentation
Preparation and characterization of composite films consisting of poly(lactic acid) and nanocrystalline cellulose Åsa Hermansson, Chemical and Biological Engineering
30 May 2012 10:00
Student project presentation
Indicators for quantifying proliferation risk and nuclear waste issues in energy system models
30 May 2012 11:00
Student project presentation
Development of cancer model in vitro using bacterial nanocellulose Andrea Roberto Calore, Chemical and Biological Engineering
30 May 2012 11:00
Student project presentation
Molecular weight dependence of polymer leaching and mass transport through ethyl cellulose/hydroxypropyl cellulose mixed films Sofie Olsson, Chemical and Biological Engineering
30 May 2012 13:00
Student project presentation
Tissue engineering ligament Paolo Roberto Pozzi, Chemical and Biological Engineering
30 May 2012 13:00
Student project presentation
M.Sc. thesis: Implementation of CAN-interface and RTJ heads-up display on an electric go-cart Master thesis presentation by Jonas Henning and Johan Lojander
30 May 2012 13:15
Student project presentation
Turning Customer Feedback into a Product Improvement Resource Master's Thesis presentation in the QOM programme by Gudrun A. Thorarensen and Hallbera Eiríksdóttir
30 May 2012 14:00
Student project presentation
Environmental assessment of golf courses - a first step towards environmental product declaration (EPD)
31 May 2012 12:30
Student project presentation
Product flow improvements at SKF Exopar in order to enable increased sales Master's Thesis presentation in the SCM programme by Gustav Münster and Ulrika Vestin
31 May 2012 16:00
Student project presentation
Analysis of high frequency harmonics injected by wind turbines in a local grid
01 June 2012 10:00
Student project presentation
Maintenance Strategies at Volvo Trucks
01 June 2012 10:15
Student project presentation
M.Sc. thesis: Detecting traumatic intracranial bleedings in a brain phantom using microwave technology Master thesis presentation by Malik Ahzaz Ahmad
01 June 2012 11:00
Student project presentation
Evaluation of empty container transportation and opportunities for improvement Master's Thesis presentation by Nils Andersson and Joakim Widstrand
01 June 2012 14:00
Student project presentation
Mathematical modeling and thermodynamic optimization of a CO2 heat pump cycle
04 June 2012 10:00
Student project presentation
Estimation of average chemical content in textile products - the case of polyester and polyamide
04 June 2012 10:00
Student project presentation
Marcus Jonsson and Carolina Sellin: Correction of shear strength in cohesive soil - A comparison focused on vane tests in west Sweden Marcus Jonsson and Carolina Sellin present their Masters Thesis in the Master Programme Geo and Water Engineering
04 June 2012 13:00
Student project presentation
Exploring inhibitors for breakthrough innovation capability Master's Thesis presentation in the MEI programme by Johanna Jeppsson and Pernilla Ahlm
04 June 2012 14:00
Student project presentation
Analysis and Modeling of Topographic Effects on Ozone and Other Pollutants from a Chemical Transport Model Emma C. Andersson and Jakob K. Süld will present their master's thesis
04 June 2012 14:00
Student project presentation
Analysis of experimental data on beta-delayed proton and alpha-particle emission Master thesis presentation by Malin Klintefjord, Fundamental Physics
05 June 2012 09:00
Student project presentation
Fluid Structure Interaction on Wind Turbine Blades Master Thesis Presentation by Christoffer Järpner & Jonas Norlin
05 June 2012 10:00
Student project presentation
Near Bell Simulation in Automotive Spray Painting Master Thesis Presentation by Lucas Ariel Martinez
05 June 2012 10:00
Student project presentation
Master thesis presentation
05 June 2012 10:00
Student project presentation
Master thesis presentation: Development of an integrated deterministic neutronic/thermal-hydraulic model using a CFD solver
05 June 2012 10:00
Student project presentation
Involving suppliers in Volvo Powertrain's strategic relationship development Master's Thesis presentation in the SCM programme by Linda Skogman and Karl Tiselius
05 June 2012 10:00
Student project presentation
Verification of sealing process and specification of gluing process requirements
05 June 2012 10:00
Student project presentation
A study of heavy metal extraction process using emulsion liquid membranes Sanna Björkegren and Rose Fassihi Karimi, Chemical and Biological Engineering
05 June 2012 13:15
Student project presentation
Tillverkning, karaktärisering och utvärdering av en ny klass av joniska lösningsmedel Glen Lekström, Institutionen för kemi- och bioteknik
07 June 2012 08:30
Student project presentation
Presentation of MSc theses
07 June 2012 09:00
Student project presentation
Simulation and Analysis of Child Kinematics during Pre-Crash Maneuvers - FE-Simulation and Physical Testing Master Thesis Presentation by Emelie Gunterberg, Anna Johansson
07 June 2012 10:00
Student project presentation
Master thesis presentation: Modeling of the PACTEL SBL-50 transient Using RELAP5 Computer Code
07 June 2012 10:00
Student project presentation
Cooldown capability of Ringhals 3 residual heat removal system - A transient numerical simulation from 4 hours to 36 hours after reactor shutdown
07 June 2012 13:15
Student project presentation
CFD for air induction systems with OpenFOAM Master Thesis Presentation by Klas Fridolin
07 June 2012 13:30
Student project presentation
Transient behaviour of post-combustion CO2 capture with MEA in coal fired power plants
08 June 2012 09:00
Student project presentation
Distribution of time in complex assembly - A simulation approach to assess balanced and unbalanced time
08 June 2012 10:00
Student project presentation
Gas-liquid mass transfer studies using planar laser induced fluorescence Hosein Bidgoli, Chemical and Biological Engineering
08 June 2012 10:30
Student project presentation
Master thesis presentation "One-shot free energy calculations for real materials"
08 June 2012 13:00
Student project presentation
Evaluation of THUMS Human FE-Model in Oblique Frontal Sled Tests against Post Mortem Human Subject Test Data Master Thesis Presentation by Elin Sibgård & Sofie Wistrand
08 June 2012 13:00
Student project presentation
Ethoxylation studies of two mole amine derivatives Johanna Carlsson, Chemical and Biological Engineering
08 June 2012 14:00
Student project presentation
Nanomaterials in Design, Master thesis presentation
08 June 2012 14:00
Student project presentation
Chiral Extensions of the MSSM Master thesis presentation by Denis Karateev, Fundamental Physics. Location F-N6115
11 June 2012 10:00
Student project presentation
Master thesis presentation: "Modelling of Lower Hybrid Current Drive in the Tore Supra Tokamak"
11 June 2012 10:00
Student project presentation
Lipid based selfassembled nanoparticles for protein drug delivery Nina Khosravi, Chemical and Biological Engineering
11 June 2012 11:00
Student project presentation
Master thesis presentation "Monte Carlo simulation of runaway electrons"
11 June 2012 11:00
Student project presentation
How can mechanical properties affect the release mechanisms - A study of mechanical strength of polymer membranes Hanna Berthag, Chemical and Biological Engineering
11 June 2012 13:00
Student project presentation
Supply Chain Localization Strategies for the Future Master's Thesis presentation by Rickard Segerdahl and Martin Andersson in the SCM programme
11 June 2012 13:00
Student project presentation
A visualization study of topical delivery of new nanoparticle drugs Maria Japlin and Andreas Albrektsson, Chemical and Biological Engineering
11 June 2012 14:00
Student project presentation
Design of an offshore wind farm and power fluctuations handling via thermal power plants and energy storage
12 June 2012 09:00
Student project presentation
New Vehicle Functionality Using Electric Propulsion Master Thesis Presentation by Adithya Arikere
12 June 2012 11:00
Student project presentation
In-Vehicle Brake System Temperature Estimation Model Master Thesis Presentation by Adriaan Neys
12 June 2012 13:00
Student project presentation
Water permeability of PLGA and PHB films enriched with additives Celine van Vooren, Chemical and Biological Engineering
13 June 2012 09:00
Student project presentation
Modelling and testing of the friction in a differential Master Thesis Presentation by Marc Ollé Bernades
13 June 2012 10:00
Student project presentation
A conceptual study of a camera monitoring system replacing class II and IV rear-view mirrors in trucks
13 June 2012 10:00
Student project presentation
Coupling of injection molding process to stress analysis of short fiber polymer composite structures Master Thesis Presentation by Jenny Carlsson
13 June 2012 10:00
Student project presentation
Master thesis presentation: CFD simulation of a safety relief valve for improvement of a one dimensional valve model in RELAP5
15 June 2012 10:00
Student project presentation
Aerodynamic loads on rotor blades by vortex panel method Master Thesis Project by Katharina Máireád Schweigler
15 June 2012 10:00
Student project presentation
Christine Enerhall and Emma Stenmark: Disc Filters to Reduce Wastewater Pathogen Levels in Raw Water Sources - Risk Reduction Potential for Göta älv Christine Enerhall and Emma Stenmark present their Masters Thesis in the Master Programme Geo and Water Engineering
15 June 2012 10:00
Student project presentation
Master thesis presentation: Measure of thermal transfer in liquid hydrogen in nucleate and film boiling regime under gravity compensating magnetic field
Last modified: June 07, 2010

 SEARCH



CHALMERS UNIVERSITY OF TECHNOLOGY - SE-412 96 GÖTEBORG, SWEDEN - TEL: +46-(0)31 772 10 00 - CONTACT US
ABOUT WWW.CHALMERS.SE